Home > Shop by Size >

“SanSiro Biarritz S73LA Hydro Spa Jetted” 73 Inch Light Aged Copper Shell French Bateau Bathtub with CoreAcryl Acrylic Interior
SanSiro Biarritz S73LA 73 Inch Hydro-Spa Jetted Lightly Aged Copper Shell French Bateau Bathtub with Thick CoreAcryl Acrylic Interior Plus Drain
 
Alternative Views:
Mannequin inside the tub in the photo is 5'8" tall

  • Fabulous lightly aged 14gge thick copper exterior
  • Requires a freestanding or wall mount faucet
  • Living finish exterior will continue to patina
  • 3/4" thick CoreAcryl white acrylic interior
  • Super quiet 1.25hp water pump
  • Direction control on 4 back and 2 foot jets plus speed and direction control on 4 side jets
  • In-line water heater
  • Ozone sanitizing
  • Super quiet 0.5hp air variable speed warmed air blower
  • 12 air jets with backflow prevention on the tub floor
  • Chromotherapy underwater light with 7 color choices
  • Waterproof remote control operation
  • Integrated drain and overflow in choice of finish
  • All jetted fittings housed between the tub inner and outer shell
  • All jet fittings are supplied in white
  • This tub requires two standard 15amp-110volt GFCI connection
  • cUL listed and MA Code accepted
    •
    Your Price: $5,795.00



    Free Shipping
    Availability:: Ships in 3 to 4 Weeks
    Product Code: S73PC


    Suitable Faucets:

    Description
    		 
    SanSiro Biarritz S73LA 73 Inch Hydro-Spa Jetted Lightly Aged Copper Shell French Bateau Bathtub with 3/4" Thick CoreAcryl Acrylic Interior
    Built in the USA
    FEATURES
    • Water Jetting
      Direction control on four back and two foot jets, variable speed and direction control on four side jets.
    • Jet Pressure Control
      • Higher pressure on the back and foot jets can be achieved by turning the flange on the variable speed side jets and lowering their output.
    • In-Line Heater
      The water jetting includes an in-line water heater that will maintain and even slightly increase the water temperature during jetting. The heater works automatically when the water runs through it.
    • Air Jetting
      The air blower is fitted with variable speed control for total enjoyment. The twelve individual air injectors in the floor will bubble up around your legs, soothingly caressing your skin as they rise. Activating the air blower for about a minute before entering the tub can be a good idea for heating up the bubbles. While the air is warmed, it can still feel slightly cool when the bubbles first touch the skin. The sensation still feels fabulous. For additional hygiene, we recommend you activate the blower for 15 seconds after each bath to blow out any moisture trapped in the air lines.
    • Chromotherapy
      For additional bathing relaxation, the system includes a seven color choice, mood enhancing chromotherapy underwater light.
    • Ozone Sanitizing
      Ozone sanitizing is included with the hydro-spa jetting system. While the jetting tubes will drain very effectively, a little residual moisture retention is unavoidable. The ozone system, which only activates when the tub is jetting, will prevent bacteria build up. However, the regular maintenance suggested herein is a necessity for fully effective hygiene.
    • Fittings Position
      The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All of the fittings are contained within the cavity in between the shells.
    • Bath Salts and Bubble Bath
      It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface.
    • Care and Maintenance
      Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives. The living finish lightly aged copper exterior will continue to patina over time, unwanted marks can be removed using a soft damp cloth, a car polish or Mothers polish.
    • Recommended Regular Maintenance

      To maintain excellent hygiene, we strongly recommend the following preventative maintenance be carried out each 1-2 months.

      • Fill you tub with warm water to 2" above the top jet.
      • Add two cups of household bleach.
      • Activate all the jets on in the fully open position.
      • Allow the jets to run for 15 minutes.
      • Switch the jets off and allow the water to sit for 15 minutes.
      • Empty the tub.
      • Re-fill with fresh water, again 2" above the top jet.
      • Run the jets for 15 minutes.
      • Empty the tub and the job is finished.
      • If the tub is not in constant use, it is still very important to continue the maintenance as described herein.