Our USA made Hydro-Spa water and air jetted tubs represent the top of the line, most feature-inclusive tubs that we supply. Featuring a modern, minimalist aesthetic, our Asti59EHS is built from the ground up to provide the ultimate bathing luxury and an enduring, quality tub that you will enjoy for years to come.
The Asti59EHS is a wide and deep tub for its size, with a wide rim for you to place items on. Inside you will find 16 strategically positioned air bubble jets providing coverage to your legs, feet and back. The sides of the tub are fitted with water massage jets positioned to massage the sides of your body and legs; four foot massage water jets are placed at the drain end of the tub while the other end features two lower lumbar back massage jets. All of the water jets offer individual direction control.
You'll also find an impressive list of technology behind the our Hydro-Spa tubs, starting with speed controls for water jets, allowing you to vary the intensity of their massaging action. To power our systems we use what are considered to be the quietest air blowers and water pumps on the market, ensuring that when you're in the tub, you hear the water action and not the equipment.
To keep the injected air bubbles as warm as possible, we equip the blower with a powerful heating element to pre-heat the injected air. This heater will raise the ambient temperature 15 to 20 degrees within a period of around 2 minutes, so switching the air jetting on before entering the tub can be a good idea. While not feeling just as cool, even heated air bubbles will feel a little cool when they make contact with the skin.
To maintain hygiene in the air pipes, every time you take a bath and drain the water, engage the blower for about 15 seconds to purge all residual water in the lines. Every three months, we recommend that you fill the tub about two inches over the highest jet with lukewarm water and add a half cup of bleach. Engage the blower and let run for two minutes. Empty and repeat this step with clean water and purge the lines when the tub is empty.
The water pump also features an incorporated heater which automatically heats the water as it flows during jetting, This will maintain the water temperature and in some cases, more so with smaller tubs, increase the temperature slightly after running 20-30 minutes. The heater features a safety cut-off and will not activate unless there is water in the pump, to prevent damage to the heater.
Hydro-spa tubs also feature sanitizing ozone generators, which ensure that bacteria will not build up in the lines. Additionally, ozone slightly softens the bathwater, enhancing the bathing experience.
To complete your "true spa" experience, hydro-spa tubs are equipped with a 10-color chromotherapy light - perfect for a soothing soak and massage in a subdued light at the end of a busy, tiring day.
All of this technology is elegantly concealed between the inner and outer shells of the tub and need only to be connected to two 15 Amp GFCI electrical connections to be up and running. The air blower, chromotherapy light and ozone are on one GFCI system and the water pump and heater are on the other. Our hydro-spa tubs are a complete, freestanding unit.
Our tubs aren't just designed for a luxurious bathing experience, they're also designed to be easy to install and easy to service, if needed. Your hydro-spa tub includes everything needed to install your tub, including the tub drain. In the unlikely event that it is necessary to service the concealed components of the tub, gaining access to these parts is a simple matter of unplugging the tub, unscrewing the drain basket, lifting the tub off of the drain and turning it on its side. The Asti59EHS also provides ample room on its wide rim to fit most deck mounted tub fillers on the market.