Home > Shop by Size >

SanSiro EclipseSM67CAJ Freestanding 67 x 34 inch Center Drain HEATED AIR JETTED High Gloss White ACRYLIC Bathtub
SanSiro 'EclipseSM67CAJ' Freestanding 67 x 34 inch Modern Air Jetted Tub
 
Alternative Views:
Made in the USA

Handheld remote control activated variable speed heated blower
  • Includes a pop-up drain and overflow cover in choice of finish plus drain hub to fit to drain pipe in floor
  • 14 total variable speed heated air jets
  • 3 for feet and 3 for back at each end
  • 8 in the floor for legs
  • Ultra-Quiet heated variable speed air blower located inside tub inner and outer shells
  • Powerful 600w heater on the blower to increase air bubble temperature
  • When the bubbles enter the water, even though they are warm, they will feel slightly cool to the skin
  • The heated air blower and all fittings are concealed within the tub shells
  • Designed and manufactured for optimal water heat retention
  • Requires ONE 110v - 15 amp GFCI electrical connection
  • MA Code Accepted
  • cUL Listed
Printer Friendly Spec. Sheet
Printer Friendly Drain Installation
Installation Manual
Your Price: $3,225.00



Availability:: Usually ships in 3 to 4 weeks
Product Code: SS-ECLIPSESM67CAJ


Freestanding Tub Filler 35-45% OFF*: 		Don't supply a faucet
Add No.017 Chrome [Add $380.00]
Add No.017 Brushed Nickel [Add $415.00]
Add No.017 Polished Nickel [Add $435.00]
Add No.017 Matte Black [Add $435.00]
Add No.017 Brushed Brass [Add $435.00]
Add No.172 Chrome [Add $360.00]
Add No.172 Brushed Nickel [Add $395.00]
Add No.172 Polished Nickel [Add $415.00]
Add No.172 Matte Black [Add $415.00]
Add No.172 Brushed Brass [Add $415.00]
Add No.041 Chrome [Add $445.00]
Add No.041 Brushed Nickel [Add $475.00]
Add No.041 Polished Nickel [Add $495.00]
Add No.041 Matte Black [Add $495.00]
Add No.041 Brushed Brass [Add $495.00]
Add Victoriana Chrome [Add $580.00]
Add Victoriana Brushed Nickel [Add $630.00]
Add Victoriana Oil Rubbed Bronze [Add $630.00]
Add Victoriana Polished Nickel [Add $630.00]
Add Victoriana Brushed Brass [Add $630.00]
Add Victoriana Matte Black [Add $630.00]

Chromotherapy*: 		Don't add chromotherapy (no extra)
Add chromotherapy [Add $285.00]

Ozone Sanitizing*: 		Don't add ozone sanitizing
Add Ozone Sanitizing [Add $175.00]

Drain Fittings Finish*: 		Chrome (no extra)
Brushed Nickel [Add $45.00]
Polished Nickel [Add $45.00]
Oil Rubbed Bronze [Add $45.00]
Matte Black [Add $45.00]
Brushed Brass [Add $45.00]
Description Electrical Cord
 

SanSiro EclipseSM67CAJ Freestanding 67 x 34 inch Center Drain HEATED AIR JETTED High Gloss White ACRYLIC Bathtub

Ready to plug in to a 15 amp 110 v GFCI
Photo here shows 67" version of the tub, proportions may change a little on different length tubs
Made in the USA, the SanSiro 'EclipseSM67CAJ' is a fabulous minimalist style air jetted acrylic bathtub.

Soothe away the aches of the day in a luxurious heated air jetted bathtub. We offer variable speed handheld remote control blower activation. There are 14 individual flat face air injectors, 8 on the floor and 3 on each end to massage calves, thighs, feet and back. We use a heated blower to increase the ambient temperature of the bubbles 15 to 20 degrees within a period of around 2 minutes. Switching the air jetting on before entering the tub can be a good idea. While the air is heated, it can still feel slightly cool when the bubbles touch the skin, it will not feel hotter than the water in the tub.

To maintain hygiene in the air pipes, every time you take a bath and drain the water, engage the blower for about 15 seconds to purge all residual water in the lines. Every three months, we recommend that you fill the tub about two inches over the highest jet with lukewarm water and add a half cup of bleach. Engage the blower and let run for two minutes. Empty and repeat this step with clean water and purge the lines when the tub is empty.

The underside and sides of the tub are specially fiberglass and resin coated and the air cavity in between the inner and outer shells acts as a natural heat loss barrier. We have conducted tests with a foam filled cavity instead of air and there is no improvement on heat retention.