Home > Shop by Size >

SanSiro Empress EMPD67N 67 Inch Hydromassage Water and Air Jetted Single Slipper Pedestal Tub Package with Accessories
Empress 67in Water and Air Jet Pedestal Bathtub
Alternative Views:

Choice of tub filler with buyer choice of finish
Pedestal base
Stainless steel braided 1/2" hose installed from faucet to floor
18 individual air jets
6 direction control side jets
2 foot jets
2 lower lumbar back jets
Single speed air blower with powerful 600w heating element to increase bubble temperature

Speed control ultra-quiet water pump with turbo manifold back pressure
10-choice color options on chromotherapy underwater mood lighting
1.25 hp 110v water pump
In-line water heater
Requires two GFCI 110v - 15 amp electrical points

Made in the USA

Specification Sheet
Installation Manual
Factory Fitted Faucet Connection

MA Code Accepted
Your Price: $4,045.00

Availability:: Usually Ships in 3 to 4 Weeks
Product Code: EMPD67N

Faucet Style & Finish*:
Victoriana Chrome (no extra)
Victoriana Brushed Nickel (no extra)
Victoriana Oil Rubbed Bronze (no extra)
Victoriana Polished Nickel (no extra)
Victoriana Matte Black (no extra)
Victoriana Brass (no extra)

SS Overflow and Drain Finish*:
Brushed Nickel
Polished Nickel
Oil Rubbed Bronze
Matte Black

Ozone Sanitizing*:
Don't add ozone sanitizing
Add Ozone Sanitizing [Add $175.00]

Tub Exterior Finish (Add 10 days)*:
Leave tub as high gloss white finish (no extra time needed)
Paint tub exterior to match solid color details I will send [Add $385.00]
Aged Chrome [Add $599.00]
Aged Copper Leaf [Add $799.00]
Eggshell Matte Black [Add $385.00]

SS Faucet or Not*:
Supply a faucet as shown (no extra)
Supply faucet as wall mount (no extra)
Supply faucet as freestanding [Add $149.00]
Don't supply a faucet [Subtract -$165.00]

Description Electrical Cord
Empress EMPD67N 67" Hydromassage Water and Air Jetted Single Slipper Pedestal Tub Package with Accessories (photo here shows 73" version with brushed nickel fixtures and fittings)
Ready to plug in to TWO 15 amp 110 v GFCI's

Made in the USA, our hydro-massage tubs incorporate high pressure heated water massage for aching muscles, lower back and feet as well as calming, soothing air bubble action from strategically positioned injectors

This is a delightful and quite roomy 67" long single slipper pedestal hydrotherapy bathtub.
It is freestanding and its' features include heated air jetting, heated water jetting to maintain the water temperature (may slightly increase the temperature after running 20-30 minutes) and chromotherapy underwater mood lighting. The jets are specially positioned to give best therapeutic results. There are 2 lower lumbar jets, 2 foot jets, 6 direction adjustable side jets and 18 individually placed air jets along the leg area and at the back.
The double shell design of the tub makes it possible to maintain the original clawfoot tub appearance with all of the jetting features hidden in between the shells. the double shell feature also offers exceptional water heat retention.
To keep the injected air bubbles as warm as possible, we equip the blower with a powerful heating element to pre-heat the injected air. This heater will raise the ambient temperature 15 to 20 degrees within a period of around 2 minutes, so switching the air jetting on before entering the tub can be a good idea. While not feeling just as cool, even heated air bubbles will feel a little cool when they make contact with the skin.
Each Empress tub has two standard 15 amp - 110v plugs that come from the back of the tub to be connected to ground force circuit interrupter electrical points on your wall. The entire installation is incredibly simple.

Care and Maintenance
To remove most stains on the acrylic surfaces, it will only need to be wiped down with a soft cloth and some very gentle soap without abrasives.

To maintain hygiene in the air pipes, every time you take a bath and drain the water, engage the blower for about 15 seconds to purge all residual water in the lines.
Every three months, we recommend that you fill the tub about two inches over the highest jet with lukewarm water and add a half cup of bleach. Engage the air blower and water pump and let run for five minutes. Empty and repeat this step with clean water and finally press the air button to purge the air lines when the tub is empty.

It is safe to use bath salts and bubble bath within the system but just remember that if you use too much bubble bath, the bubbles could really mount up, especially with the water jets on.

To complete the Empress package, we combine it with our beautiful Victoriana tub filler and drain in your choice of available colors.