Home > Shop by Size >

“SanSiro Feronia71EWJ” 71 x 35 inch End Drain Variable Speed Water Jetted Freestanding Acrylic Bathtub with Zone Power Control
SanSiro Feronia 71in End Drain Water Jetted Tub
 
Alternative Views:

No Remote Parts - All Built-in
  • Super quiet 1.25hp water pump
  • Zone Water Speed and Pressure Control
  • 10 direction control jets, 4 back, 4 feet, 2 hip
  • Waterproof remote control operation
  • Integrated drain and overflow in choice of finish
  • All jetted fittings housed between the tub inner and outer shell
  • All jet fittings are supplied in white
  • This tub requires one standard 15amp-110volt GFCI connection
  • Meets or exceeds ASME A112.19.7/CSA B45.10
  • All electrical components UL listed
  • MA Code accepted
    •
    Your Price: $2,695.00



    Free Shipping
    Availability:: Ships in 2 to 3 weeks
    Product Code: SS-FERON71EWJ


    Drain Finish*:

    Water Heater*:

    Suitable Faucets:

    Ozone Sanitizing*:

    Description
    		 
    SanSiro Feronia71EWJ 71 x 35 inch End Drain Variable Speed Water Jetted Freestanding Bathtub with Zone Control
    FEATURES
    • Water Jetting
      Direction adjustment on four back jets, two hip jets and four foot jets.
    • Zone Water Speed and Pressure Control
      • The real power and therapy behind the water jets. A simple shift of the Zone Control lever will adjust the speed on all foot and back jets to suit your preference. It can also double the water pressure to the feet or the back for the most powerful water massage jetting in the bathtub industry.
    • Fittings Position
      The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All of the fittings are contained within the cavity in between the shells.
    • Bath Salts and Bubble Bath
      It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface.
    • Care and Maintenance
      Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives.
    • Recommended Regular Maintenance

      To maintain excellent hygiene, we strongly recommend the following preventative maintenance be carried out each 1-2 months.

      • Fill you tub with warm water to 2" above the top jet.
      • Add two cups of household bleach.
      • Activate all the jets on in the fully open position.
      • Allow the jets to run for 15 minutes.
      • Switch the jets off and allow the water to sit for 15 minutes.
      • Empty the tub.
      • Re-fill with fresh water, again 2" above the top jet.
      • Run the jets for 15 minutes.
      • Empty the tub and the job is finished.
      • If the tub is not in constant use, it is still very important to continue the maintenance as described herein.
    Zone Jetting Normal to Maximum