Our USA made Hydro-Spa water and air jetted tubs represent the top of the line, most feature-inclusive tubs that we supply. Featuring a unique and stylish modern slipper shape, our Feronia71EHS is built from the ground up to provide the ultimate bathing luxury and an enduring, quality tub that you will enjoy for years to come.
The Feronia71EHS is a long, deep tub that wraps you in comfort and elegant style. Inside you will find 16 strategically positioned air bubble jets providing coverage to your legs, feet and back. The sides of the tub are fitted with water massage jets positioned to massage the sides of your body and legs; two foot massage water jets are placed at one end of the tub while the other end features four back massage jets. All of the water jets offer individual direction control.
You'll also find an
impressive list of technology behind our Hydro-Spa tubs, starting with speed
controls for water jets, allowing you to vary the intensity of their massaging
action. To power our systems we use what are considered to be the quietest air
blowers and water pumps on the market, ensuring that when you're in the tub,
you hear the water action and not the equipment.
To keep the injected
air bubbles as warm as possible, we equip the blower with a powerful heating
element to pre-heat the injected air. This heater will raise the ambient
temperature 15 to 20 degrees within a period of around 2 minutes, so switching
the air jetting on before entering the tub can be a good idea. While
not feeling just as cool, even heated air bubbles will feel a little cool
when they make contact with the skin.
To maintain hygiene in
the air pipes, every time you take a bath and drain the water, engage the
blower for about 15 seconds to purge all residual water in the lines. Every
three months, we recommend that you fill the tub about two inches over the
highest jet with lukewarm water and add a half cup of bleach. Engage the blower
and let run for two minutes. Empty and repeat this step with clean water and
purge the lines when the tub is empty.
The water pump also features an incorporated heater which automatically heats the water as it flows during jetting, This will maintain the water temperature and in some cases, more so with smaller tubs, increase the temperature slightly after running 20-30 minutes. The heater features a safety cut-off and will not activate unless there is water in the pump, to prevent damage to the heater.
Hydro-spa tubs also feature sanitizing ozone generator, which ensure that bacteria will not build up in the lines. Additionally, ozone slightly softens the bathwater, enhancing the bathing experience.
To complete your "true spa" experience, hydro-spa tubs are equipped with a 10-color chromotherapy light - perfect for a soothing soak and massage in a subdued light at the end of a busy, tiring day.
All of this technology is elegantly concealed between the inner and outer shells of the tub and need only to be connected to two 15 Amp GFCI electrical connections to be up and running. The air blower, chromotherapy light and ozone are on one GFCI system and the water pump and heater are on the other. Our hydro-spa tubs are a complete, freestanding unit.
Our tubs aren't just designed for a luxurious bathing experience, they're also designed to be easy to install and easy to service, if needed. Your hydro-spa tub includes everything needed to install your tub, including the tub drain. In the unlikely event that it is necessary to service the concealed components of the tub, gaining access to these parts is a simple matter of unplugging the tub, unscrewing the drain basket, lifting the tub off of the drain and turning it on its side. The Feronia71EHS is not suitable for deck mounted faucets due to its narrow rim and must be installed with a freestanding or wall mounted faucet.