Home > Shop by Size >

“SanSiro Antium59EWJ” 59 x 32 inch End Drain Water Jetted Freestanding Acrylic Bathtub
Photo of “SanSiro Antium59EWJ” 59 x 32 inch End Drain Water Jetted Freestanding Acrylic Bathtub with Zone Power...
 
Alternative Views:


No Remote Parts

For scale - person inside the tub in the photo is 5'8" tall

This tub is recommended for bathers up to 5'4" tall

Comfort & Operation

  • 4 back and 2 foot direction control water jets plus 4 direction with speed control side jets
  • Adjusting side jets to low, offers a more robust foot and back massage action.
  • Waterproof, wireless remote function control
  • No remote parts

Installation & Requirements

  • Pop-up drain in choice of six finishes
  • All jet fittings are supplied in white
  • This tub requires one standard 15amp-110volt GFCI connection

Safety & Compliance

  • Meets or exceeds ASME A112.19.7/CSA B45.10
  • All electrical components UL listed
  • MA Code accepted

Additional Features

  • Soundless 1.25hp water pump
  • Integrated overflow

Download: Specification Sheet
Download: Installation & Care Manual

Designed, built and tested in the USA

Every tub undergoes a 12-point final inspection, including a full-immersion water test and shell integrity check

10 year tub body warranty and 5 year jetting components warranty

Speak with a tub specialist directly - Call 727-282-3392

Your Price: $2,645.00



Free Shipping
Availability:: Ships in 2 to 3 Weeks
Product Code: SS-ANTIUM59EWJ


Drain Finish*:


Suitable Faucets:


Water Heater*:


Ozone Sanitizing*:


Tub Exterior Finish (10 extra days)*:


Super-Comfy Bathtub Pillow*:


Description
 

SanSiro Antium59EWJ 59 x 32 inch End Drain Water Jetted Freestanding Acrylic Bathtub

  • Water Jetting
    Four direction control water jets at the back and two at the foot plus four side jets that are both direction and speed controlled. When adjusted to low, this offers a much more robust massage for feet and back..
  • Fittings Position
  • The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All of the fittings are contained within the cavity in between the shells.
  • Bath Salts and Bubble Bath
    It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface.
  • Care and Maintenance
    Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives.
  • Recommended Regular Maintenance

    To maintain excellent hygiene, we strongly recommend the following preventative maintenance be carried out each 1-2 months.

    • Fill you tub with warm water to 2" above the top jet.
    • Add two cups of household bleach.
    • Activate all the jets on in the fully open position.
    • Allow the jets to run for 15 minutes.
    • Switch the jets off and allow the water to sit for 15 minutes.
    • Empty the tub.
    • Re-fill with fresh water, again 2" above the top jet.
    • Run the jets for 15 minutes.
    • Empty the tub and the job is finished.
    • If the tub is not in constant use, it is still very important to continue the maintenance as described herein.