Soothe away the aches of the day in a luxurious heated air massage bathtub. All of our individual flat face air injectors are placed on the bottom of the tub to massage calves and thighs.
To keep the injected air bubbles as warm as possible, we equip the blower with a powerful heating element to pre-heat the injected air. This heater will raise the ambient temperature 15 to 20 degrees within a period of around 2 minutes, so switching the air jetting on before entering the tub can be a good idea. While not feeling just as cool, even heated air bubbles will feel a little cool when they make contact with the skin.
To maintain hygiene in the air pipes, every time you take a bath and drain the water, engage the blower for about 15 seconds to purge all residual water in the lines. Every three months, we recommend that you fill the tub about two inches over the highest jet with lukewarm water and add a half cup of bleach. Engage the blower and let run for two minutes. Empty and repeat this step with clean water and purge the lines when the tub is empty. FinishingThe high gloss acrylic is very simple to maintain. To clean the exterior, just wipe with a soft cloth. For interior cleaning, we recommend a soft cloth and a cleaner like Simple Green, we don't recommend anything abrasive. T
he faucet and fittings are also very easy to maintain. To prevent calcium build up in hard water areas, we recommend that the fixtures are dried with a soft cloth after each use.