Experience Timeless Elegance and Modern Comfort
Indulge in the perfect fusion of vintage charm and contemporary luxury with our beautifully crafted single slipper pedestal bathtub. While embracing classic design, this tub incorporates advanced features for a truly relaxing and indulgent bathing experience. The pedestal base adds a transitional touch, blending effortlessly into both traditional and modern spaces.
Key Features:
Water Jetting: Customize your bath with direction and speed-adjustable foot and side jets. Four back jets, complete with direction controls, ensure a personalized massage experience.
Water Speed & Pressure Control: Fine-tune your relaxation. Adjust the water pressure with ease—higher pressure for the back jets is achieved by turning the flange on the variable-speed jets, or reduce the output to your preference.
Discreet Fittings: Preserve the timeless aesthetic with a double-shell design that hides all fittings and jetting components, maintaining the tub’s classic look.
Bath Salt & Bubble Bath Friendly: Elevate your soak with bath salts or bubble bath—just ensure salts are fully dissolved to protect the tub surface.
Low-Maintenance Design: The high-gloss acrylic finish is easy to care for—simply wipe with a soft cloth and mild soap for a long-lasting shine.
To complete the luxurious experience, the tub comes with a premium British telephone-style faucet in a choice of finishes. Prefer a faucet-free look? Select the option to exclude it in the customization table.
Available Options:
- Integrated water heater
- Ozone sanitizing system
- Chromotherapy underwater lighting
SanSiro Jetted Tubs - Electrical Cord Position on Tub
All of the jetted tubs in the SanSiro range use a 3' long cable 110v – 15-amp standard 3 pin plug. You have choices as to where you would like the plug on the jetting system to connect to the GFCI outlet in your home.
1 - Leave the connection under the tub. In this case, you would need to have your GFCI at the control board and not on the plug under the tub.
2.- Connect to a wall socket GFCI. You can drill holes in the outside of the tub and run the electrical cable to a wall mounted GFCI near the tub.
3 - To drill the holes, we recommend first drilling the 1/8” (bit supplied) pilot hole and then the hole saw supplied. If you have two plugs, drill two holes.
4 - You can then feed the cord through the hole(s) and attach the rubber grommet. This grommet fits around the inside of the hole to prevent a rough tub edge rubbing on the electrical cord.
Just in case you need it, we include an additional 3’ long extension cord for each plug on the tub.
See or print photo directions