' is a delightful single slipper pedestal Hot Air jetted bathtub offering a true and traditional vintage shape. It has good leg length and is quite roomy inside but please check out the photos below for leg room (see photos pf person in tub). A truly beautiful bathtub finished in high gloss white acrylic exterior and interior with an easy clean slip resistant floor.
All of the 24 white air jets are positioned in the floor and will ripple up around you legs, thighs and lower back as you enjoy a lovely relaxing soak. The variable speed control allows you have a soft or more aggressive bubble massage. While the air is heated to over 115 degrees Fahrenheit, the bubbles may still feel a little cool at the start until the heater gets up to full heat. To help overcome this issue, it is a good idea to start the bubbles before you enter the bath.
While all of the jets and air hose are concealed inside the pedestal, safety regulations require that we use an anti-backflow Hartford Loop positioned at the back, outside of the tub. See photo below. If you choose a color for your tub, the Hartford Loop will be finished in the same color.
To install, all your contractor has to do is plug in the three foot of cable from the back of your tub into a standard 15 amp GFCI. In the unlikely event of blower issues, the very simple remedy is through disconnecting the water supply and drain, turning the tub over and fixing the problem.
Our CoreAcryl acrylic is designed to offer exceptional heat retention and is a substantial 3/4" thick at the lip and drain.
The VTASL67 double ended package has everything required by your plumber to install from the floor up.
The photo here shows the 67" long version, proportions may vary slightly for longer or shorter tubs.