SanSiro 'Feronia71EHS' 71" End Drain HYDRO-SPA Water and Air Jetted High Gloss White ACRYLIC Freestanding Bathtub
Ready to plug in to TWO 15 amp 110 v GFCI's
Made in the USA, the SanSiro 'Feronia71EHS' is a fabulous modern slipper style full Hydro-Spa water and air jetted acrylic bathtub.
This is a lovely wide, deep tub, if you take a look at our photos, you will see a
5'8" person inside the tub.
All of the jet fittings are concealed between the inner and outer shells of the tub and need simply be connected to
two 15 amp GFCI electrical connections to be up and running. The air blower, chromotherapy light and ozone are on one GFCI system and the water pump with heater the other
In the unlikely event of an issue with the blower or pump etc.,
access for repair is extremely simple. Unscrew the drain basket, lift the tub straight up, turn it over on its' side and you have easy access to all working parts.
In the event that a fault occurs with the electronic
touch panel controls, these will simply prize off to be replaced, no need for access from below.
no suitable deck area to mount a faucet on the Feronia and it would require either a wall mounted or freestanding tub filler.
No special drain is required and this package includes everything needed to install the tub, including the drain.
24 strategically positioned air injectors to reach all areas of the legs, feet and back.
All 14 water jets offer individual direction control, including 'V' shape at back.
variable air speed options on both the water and air functions allow bathers to enjoy a really soothing soft and slow massage action or a more vigorous one as required.
We use what are considered to be the
quietest air blower and water pumps on the market and when in the tub, you hear the water action, not the equipment.
To keep the injected air bubbles as warm as possible, we equip the blower with a powerful
600w heating element to pre-heat the injected air. This 600w heater will in fact heat the air bubbles to around 115 degrees within a period of around 2 minutes, so switching the air jetting on before entering the tub can be a good idea.
water pump has a heater incorporated into the system. This heater can be switched on or off to suit the bather and will steadily increase the water temperature in the tub to around a true spa experience of around 104 degrees. The 'on/off' button for the heater has a light to indicate 'on'. To enhance safety, the heater will not activate unless there is water running through it, even if showing 'on'.
additional sanitizing, we include Ozone generators on both the air and water jets. This ensures that no bacteria will build up in the lines. The ozone generation will also soften the bath water a little to enhance the bathing experience.
To complete this 'true spa" experience, this tub is equipped with a 1
0-color select chromotherapy underwater mood light. This is perfect for a really soothing soak and massage in a subdued light at the end of a busy, tiring day.
The underside and sides of the tub are specially fiberglass and resin coated and the air in between the inner and outer shells acts as a natural
heat loss barrier.