SanSiro 'Augusta59EWJ' 59 x 35 inch End Drain WATER JETTED High Gloss White ACRYLIC Freestanding Bathtub
Ready to plug in to a 15 amp 110 v GFCI
The end drain version of this tub has slightly longer leg length than the center drain option.
Made in the USA, the SanSiro 'Augusta59EWJ' is a fabulous wide oval shaped water jetted acrylic bathtub.
This is a lovely wide, deep tub, if you take a look at our size chart, you will see a 5'8" person inside the tub.
All of the jet fittings are concealed between the inner and outer shells of the tub and need simply be connected to one 110v - 15 amp GFCI electrical connections to be up and running.
In the unlikely event of an issue with the blower or pump etc., access for repair is extremely simple. Unscrew the drain basket, lift the tub straight up, turn it over on its' side and you have easy access to all working parts.
The deck area has ample access from underneath to fit most deck mounted tub fillers on the market, but the tub is also perfect for wall mount and freestanding tub fillers.
No special drain is required and this package includes everything needed to install the tub, including the drain.
As well as offering 4 foot and 4 side massage jets, there are 2 lower lumbar back water jets. All 10 water jets offer individual direction control.
We use what are considered to be the quietest water pumps on the market and when in the tub, you hear the water action, not the equipment.
The underside and sides of the tub are specially fiberglass and resin coated and the air in between the inner and outer shells acts as a natural heat loss barrier.