Home > Shop by Size >

SanSiro Toulon67HASoaker 67" x 32.5" Hammered Aged Solid Copper Exterior French Bateau Freestanding Tub with CoreAcryl Acrylic Interior
SanSiro 'Toulon67HASoakr' 67" Hammered Aged Solid Copper Exterior French Bateau Bathtub with Thick CoreAcryl Acrylic Interior
 
Alternative Views:


  • Mannequin inside tub in photo represents a 5'8" tall person
  • A beautiful French Bateau style air jetted, skirted bathtub using the highest quality 99.6% pure copper for the exterior shell and very low maintenance, 3/4" thick heavy duty CoreAcryl acrylic shell on the interior.
  • The outer surface of the tub will continue to patina very slowly to reflect life in your home.
  • We use non-recycled 1.6mm thick, mill certified 99.6% pure copper sheet.
  • Includes a high gloss bright white 'Firm Touch Drain Stopper' with stylish, slotted overflow
  • Faucet is not included.
  • Requires either a wall mount or freestanding faucet
  • Four adjustable height foot pads for non-level floors
  • Tub is solidly connected to the floor using the adjustable height foot pads with industrial Velcro supplied
  • Tub shell made in Europe, finished in the USA
  • MA Code accepted

Download Specification Sheet (PDF. 2.5mb)

Download Installation & Care Manual (PDF, 364kB)

Your Price: $3,050.00



Free Shipping
Availability:: Ships in 1 to 2 Weeks
Product Code: 67TOULONHASOAK


Suitable Faucet at 45% Discount*:


Description
 
A Stunning French Bateau Skirted Soaking Bathtub

Two tub shells. The outer shell is new 99.6% pure 1.6mm thick copper from the mill. We do not use re-cycled copper. The inner shell is 3/4" thick, heavy duty, CoreAcryl double skin, easy clean acrylic.
The outer shell fits snugly into the groove under the roll top on the CoreAcryl interior tub. The CoreAcryl tub shell is supported on a steel frame that has four height adjustable foot supports. These foot supports are used to adjust height on uneven floors as well as to attach the tub to the floor. The support for the inner shell is also attached to the outer copper shell creating a single unit, not two separate parts. The shells can be easily separated and re-connected if required for access purposes.
The overall feel is that of a very substantially built single bathtub.

This tub is very simple to install. The 1.5" tub drain can be attached to either a PVC hub fitting or an Island floor drain with tailpiece. There is no requirement for any exterior piping or tubing and the tub can sit anywhere in the room with nothing except the beautiful shell showing.
The tub has an elegantly stylish slotted overflow that is integrated into the factory supplied floor drain and does not require any additional pipework. The 'Firm Touch Drain Stopper' in high gloss bright white, compliments the finish of the tub.
To guarantee no leaks on the overflow, every single tub we supply is fully leak tested and approved before shipping.
The inner shell has an easy clean, high gloss slip resistant bathing well floor. A soft cloth with some liquid soap will remove any marks.

Tub exterior finish. The exterior shell has a light aged patina hammered copper that will continue to age slowly in the home.

The bathtub is ICC-ES tested, listed and approved.