SanSiro 'AquinoCAJ67' 67 x 32 inch Center Drain HOT AIR JETTED High Gloss White ACRYLIC Freestanding Bathtub
Ready to plug in to a 15 amp 110 v GFCI
Made in the USA, the SanSiro 'Aquino67CAJ' is a fabulous narrow lip minimalist air jetted acrylic bathtub.
All of the air jet fittings are concealed between the inner and outer shells of the tub and need simply be connected to a 15 amp GFCI to be up and running.
In the unlikely event of an issue with the blower, access for repair is extremely simple. Unscrew the drain basket, lift the tub straight up, turn it over on its' side and you have easy access to all working parts.
The Aquino requires either a wall mount or freestanding tub filler.
No special drain is required and this package includes everything needed to install the tub, including the drain.
There are 18 strategically positioned air injectors to reach all areas of the legs, feet and back.
With the variable air speed option, bathers can enjoy a really soothing soft and slow bubble action or a more vigorous one as required.
We use what is considered to be the quietest air blower on the market and when in the tub, you hear the bubbles, not the blower.
To keep the injected air bubbles as warm as possible, we equip the blower with a powerful 600w heating element to pre-heat the injected air. This 600w heater will in fact heat the air bubbles to around 115 degrees within a period of around 2 minutes, so switching the air jetting on before entering the tub can be a good idea.
The underside and sides of the tub are specially fiberglass and resin coated and the air in between the inner and outer shells acts as a natural heat loss barrier.