Home > Shop by Size >

“SanSiro Antium67EWJ” 67 x 32 inch End Drain Water Jetted Freestanding Acrylic Bathtub
Photo of “SanSiro Antium67EWJ” 67 x 32 inch End Drain Water Jetted Freestanding Acrylic Bathtub Jetted Freestanding Tub
 
Alternative Views:

No Remote Parts - All Built-in

Comfort & Operation

  • Super quiet 1.25hp water pump
  • 4 back and 2 foot direction control water jets plus four direction with speed control side jets.
  • Adjusting the side jets to low offers a more robust massage for the feet and the back
  • Waterproof remote control operation
  • All jetted fittings housed between the tub inner and outer shell

Installation & Requirements

  • Integrated drain and overflow in choice of finish
  • All jet fittings are supplied in white
  • This tub requires one standard 15amp-110volt GFCI connection

Safety & Compliance

  • Meets or exceeds ASME A112.19.7/CSA B45.10
  • All electrical components UL listed
  • MA Code accepted

Download: Drain Spec
Download: Antium67E Spec Sheet
Download: Installation & Care Manual

Designed, built and tested in the USA

Every tub undergoes a 12-point final inspection, including a full-immersion water test and shell integrity check

10 year tub body warranty and 5 year jetting components warranty

Speak with a tub specialist directly - Call 727-282-3392
Your Price: $2,745.00



Free Shipping
Availability:: Ships in 2 to 3 Weeks
Product Code: SS-ANTIUM67EWJ


Drain Finish*:

Suitable Faucets:

Water Heater*:

Ozone Sanitizing*:

Tub Exterior Finish (10 extra days)*:

Super-Comfy Bathtub Pillow*:

Description
 

SanSiro Antium67EWJ 67 x 32 inch End Drain Water Jetted Freestanding Acrylic Bathtub

  • Water Jetting
    Water system incorporates four back and two foot direction control water jets, plus four direction with speed control side jets. Adjusting these side jets to low, offers a much more robust foot and back massage.
  • Fittings Position
    • The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All of the fittings are contained within the cavity in between the shells.
  • Bath Salts and Bubble Bath
    It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface.
  • Care and Maintenance
    Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives.
  • Recommended Periodic Maintenance
  • Recommended Periodic Maintenance
  • To maintain excellent hygiene, we recommend the following preventative maintenance be carried out each 3-6 months.
  • Fill you tub with lukewarm water to 2" above the top jet.
  • Add one cup of household bleach.
  • Activate all the jets in the fully open position.
  • Allow the jets to run for 15 minutes.
  • Switch the jets off and allow the water to sit for 15 minutes.
  • Empty the tub and lightly rinse inside.