 |
 |
 |
|
Empress EMPD75N 75" Hydromassage Water and Air Jetted Double Ended Pedestal Tub Package
Ready to plug in to TWO 15 amp 110 v GFCI's
Built to Code in the USA and cUL Approved
A simply beautiful, elegant jetted pedestal bathtub
Includes a gorgeous Victoriana deck mounted tub filler in your choice of finish
Includes drain with overflow cover in your choice of finish
Flexible hot and cold water supply lines
The water jetting system includes ozone sanitizing and jet speed control
Four speed and direction control side jets
Two speed and direction control foot jets
Four direction control back jets
Includes twelve air injectors in the tub floor
The variable speed heated air injectors feel fabulous on the legs
For added hygiene, the system is equipped with ozone sanitizing
Includes powerful heater on the blower to increase air bubble temperature
The heated air blower, water pump etc. are concealed within the tub shells
Designed and manufactured for optimal strength and water heat retention
Requires TWO - 15 amp GFCI
Easy Clean slip resistant floor
cUL Listed
MA Code Accepted
This beautiful tub package includes an integrated drain and overflow cover plus a beautiful Victoriana deck mounted faucet with handheld in a variety of finishes. All the fittings are made from brass.
This tub encompasses a delightful vintage appearance while incorporating the most modern spa jetting functions. The water jet power speed control allows for completely variable speed on all jets with one turn. Adjusting the six speed adjustable side and foot jets to minimum allows the four back jets to offer up quite vigorous massage. Bathers can enjoy a relaxing, soothing soft soak all the way up to a powerful massage.
Like the water pump, the heated air blower is remote control activated with variable speed options for total enjoyment.
The twelve individual air injectors in the floor will bubble up around your legs, soothingly caressing your skin as they rise.
Each Empress air tub has a heated blower that increases the ambient temperature of the bubbles by 15 to 20 degrees within a period of around 2 minutes. Switching the air jetting on before entering the tub can be a good idea. While the air is heated, it can still feel slightly cool when the bubbles first touch the skin. The sensation still feels fabulous.
The water supply is also fitted with an in-line water heater that will maintain and even slightly increase the water temperature as the water jets operate.
For additional bathing relaxation, the Empress tubs a standard fitted with seven color choice chromotherapy underwater lighting.
We design our ozone sanitized water jetting to be the most efficient in the industry for draining of all lines after bathing. However, as an added hygiene precaution, we recommend that every 6 months, the tub should be filled above the highest jet with lukewarm water plus half a cup of bleach. Engage the pump and let run for five minutes. Empty and repeat this step with clean water to rinse.
While the tub is fitted with ozone sanitizing, for added hygiene, we recommend you activate the blower for 15-30 seconds after each bath to blow out any water trapped in the air lines.
The double shell design of the tub makes it possible to maintain the original clawfoot tub appearance with all of the jetting features hidden in between the shells. the double shell feature also offers exceptional water heat retention.
Care and Maintenance
For cleaning the high gloss acrylic finish only requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives.
It is safe to use bath salts and bubble bath within the system.
If you have any questions, we are always easy to get hold of on 1.866.938.3880
We look forward to hearing from you.
SanSiro Jetted Tubs - Electrical Cord Position on Tub All of the jetted tubs in the SanSiro range use a 3' long cable 110v – 15-amp standard 3 pin plug. You have choices as to where you would like the plug on the jetting system to connect to the GFCI outlet in your home.
1 - Leave the connection under the tub. In this case, you would need to have your GFCI at the control board and not on the plug under the tub.
2.- Connect to a wall socket GFCI. You can drill holes in the outside of the tub and run the electrical cable to a wall mounted GFCI near the tub.
3 - To drill the holes, we recommend first drilling the 1/8” (bit supplied) pilot hole and then the hole saw supplied. If you have two plugs, drill two holes.
4 - You can then feed the cord through the hole(s) and attach the rubber grommet. This grommet fits around the inside of the hole to prevent a rough tub edge rubbing on the electrical cord.
Just in case you need it, we include an additional 3’ long extension cord for each plug on the tub.
See or print photo directions
|
|
|
 |
|
 |
|