Home > Shop by Size >

DOMENICO-AIR67' 67" CoreAcryl Acrylic French Bateau Pedestal HEATED AIR JETTED Bathtub Package with a Patina Copper Leaf Exterior
DOMENICO AIR67 67in Acrylic French Bateau Tub
 
Alternative Views:


YOUR CHOICE OF FAUCET STYLE AND FINISH AT NO EXTRA COST
Single speed air blower
Powerful 600w heating element to increase bubble temperature
20 heated air injectors
Activator button on side of tub
Three foot of regular 15 amp - 110v electrical cable from the back of the tub to GFCI
Package includes freestanding tub filler of choice with handheld shower and drain with overflow
Requires ONE - 15 amp GFCI
Slip resistant floor

Made in the USA

Printer friendly spec. sheet 67" tub
Printer friendly spec. sheet Tub Filler
Printer friendly spec. sheet Tub Drain
Installation Manual


Product is approved and listed in compliance with the flowing standards:
CSA B45.5/IAPMO Z124-2017
ASME A112.18.1-2018/CSA B125.1-18
MA Code Accepted

Your Price: $3,295.00



Availability:: Usually Ships in 4 to 5 Weeks
Product Code: REN-DOMENICO67AJ


DC Faucet Style & Finish*:
Victoriana Chrome (no extra)
Victoriana Oil Rubbed Bronze (no extra)
Victoriana Polished Nickel (no extra)
Victoriana Matte Black (no extra)
Victoriana Brass (no extra)
Edwardian Chrome
Edwardian Brushed Nickel (no extra)
Edwardian Oil Rubbed Bronze (no extra)

Freestanding Faucet or Not*:
Supply Freestanding Faucet (no extra)
Supply Faucet as a Wall Mount [Subtract -$79.00]
Supply Drain but NO Faucet [Subtract -$195.00]

SS Overflow and Drain Finish*:
Chrome
Brushed Nickel
Polished Nickel
Oil Rubbed Bronze
Matte Black
Brass

Chromotherapy*:
Don't add chromotherapy (no extra)
Add chromotherapy [Add $185.00]

Ozone Sanitizing*:
Don't add ozone sanitizing
Add Ozone Sanitizing [Add $175.00]

Finish Sheen*:
I prefer the High Gloss Sheen
I prefer the Flat/Eggshell Sheen
Please send me samples and I will confirm

Description Electrical Cord Extended Information
 
'DOMENICO-AIR67' 67" CoreAcryl Acrylic French Bateau Pedestal HEATED AIR JETTED Bathtub Package with a Patina Copper Leaf Exterior
Ready to connect to a 15 amp GFCI

Made in the USA,

Soothe away the aches of the day in a luxurious heated air massage bathtub. All of our individual flat face air injectors are placed on the bottom of the tub to massage calves and thighs.

To keep the injected air bubbles as warm as possible, we equip the blower with a powerful heating element to pre-heat the injected air. This heater will raise the ambient temperature 15 to 20 degrees within a period of around 2 minutes, so switching the air jetting on before entering the tub can be a good idea. While not feeling just as cool, even heated air bubbles will feel a little cool when they make contact with the skin.

To maintain hygiene in the air pipes, every time you take a bath and drain the water, engage the blower for about 15 seconds to purge all residual water in the lines. Every three months, we recommend that you fill the tub about two inches over the highest jet with lukewarm water and add a half cup of bleach. Engage the blower and let run for two minutes. Empty and repeat this step with clean water and purge the lines when the tub is empty.

In the unlikely event of a blower failure, replacing it is also very simple, just disconnect the tub from the drain, turn it over and replace the blower, about a 30 minute job.

Product Details
The gorgeous shape of this pedestal tub is made even more elegant when finished in aged copper patina leaf. We don't paint the surface and sponge on a darker paint for ageing, we apply genuine copper leaf to the entire exterior surface of the tub and then apply specially prepared antiquing liquids to expedite the darkening process of the copper patina. While there are various contrasting shades of gold, copper and browns, at areas on the tub, there may also be some soft greens, this would be typical of a naturally aged copper patina. While the exterior definitely looks like metal, it shows what appears to be the effects of natural aging on the surface.
To maintain a natural look, we finish with three layers of soft eggshell gloss lacquer as shown on photo.

To assist you in your decision making, we'll be happy to send samples on request.

Finishing
The exterior is very simple to maintain and needs just a soft soapy cloth to remove any marks. Sine we apply the lacquer, the patina will not change over the years.