Home > Shop by Size >

SanSiro SSPD67W 67 Inch Water Massage Jetted Single Slipper Pedestal Tub Package
Long Acrylic Bathtub 67" Sansiro Water Jet Single Slipper Pedestal Tub | Baths Of Distinction
 
Alternative Views:



No Remote Parts - All Built-in
  • Victoriana deck mounted or freestanding tub filler in choice of finish
  • Super quiet 1.25hp water pump
  • 4 direction control back jets plus 2 foot and 4 side speed and direction control jets
  • Waterproof remote control operation
  • Flexible hot and cold water supply lines to deck mounted faucet
  • Integrated drain and overflow in choice of finish
  • All jets are supplied in white to match tub
  • This tub requires one standard 15amp-110volt GFCI connection
  • Meets or exceeds ASME A112.19.7/CSA B45.10
  • All electrical components UL listed
  • MA Code accepted
  • Your Price: $3,345.00




    Availability:: Ships in 3 to 4 Weeks
    Product Code: SSPD67WATER


    SS Faucet or Not*:


    SS Faucet Choice*:


    SS Overflow and Drain Finish*:


    Water Heater*:


    Ozone Sanitizing*:


    Chromotherapy Light*:


    Tub Exterior Color*:


    Description Electrical Cord
     
    SanSiro SS67PDW 67" SanSiro WATER Jetted Single Slipper Pedestal Tub Package
    Built in the USA and cUL Listed
    FEATURES
    • Water Jetting
      Direction control on four back jets, speed and direction control on four side jets and two foot jets.
    • Water Speed and Pressure Control
    • Higher pressure on the back jets can be achieved by turning the flange on the variable speed jets and lowering their output.
    • Fittings Position
      The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All of the fittings are contained within the cavity in between the shells.
    • Bath Salts and Bubble Bath
      It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface.
    • Care and Maintenance
      Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives.
    • Recommended Regular Maintenance

      To maintain excellent hygiene, we strongly recommend the following preventative maintenance be carried out each 1-2 months.

      • Fill you tub with warm water to 2" above the top jet.
      • Add two cups of household bleach.
      • Activate all the jets on in the fully open position.
      • Allow the jets to run for 15 minutes.
      • Switch the jets off and allow the water to sit for 15 minutes.
      • Empty the tub.
      • Re-fill with fresh water, again 2" above the top jet.
      • Run the jets for 15 minutes.
      • Empty the tub and the job is finished.
      • If the tub is not in constant use, it is still very important to continue the maintenance as described herein.